Cloud-electronics PM16 Manuel d'utilisateur télécharger pdf (Page 18)

PM4/8/12/16 & PM4/8-SA Installation and User Guide v1.0

Paging a zone group – groups A to D

1. Press the GROUP button for the required zone group. (The zone LEDs

corresponding to the zones dened for the group will illuminate.)

2. Press and hold down the TALK/SEND button.

3. Make the announcement.

4. Zones may be added/removed during the announcement. (NOTE - this is only

‘per-announcement’; it does not alter the group denition).

5. Release the TALK/SEND button.

Paging a zone group – groups E to H (Model PM-8SA only)

1. ‘Double-click’ the GROUP button for the required zone group. (The zone LEDs

corresponding to the zones dened for the group will illuminate.)

2. Press and hold down the TALK/SEND button.

3. Make the announcement.

4. Zones may be added/removed during the announcement. (NOTE - this is only

‘per-announcement’; it does not alter the group denition).

5. Release the TALK/SEND button.

Sending a pre-recorded message to a zone group – groups A to D

1. Press the GROUP button for the required zone group. (The zone LEDs

corresponding to the zones dened for the group will illuminate.)

2. Press the MESSAGE button for the required pre-recorded message; the

associated LED will illuminate to conrm selection.

3. To broadcast the message, press and release the TALK/SEND button. The BUSY

LED will illuminate for the duration of the message.

4. Zones may be selected/deselected during the message.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Pas de commentaire

Cloud-electronics PM16 Manuel d'utilisateur Page 18