Cloud-electronics RH-8c Manuel d'utilisateur

RH-8 Headphone StationInstallation Guide

RH-8 Installation Guide10If the installed CAT-5 cable is to be wired directly to the RH-8 without an intermediate data point, terminate the cable with

RH-8 Installation Guide11Hard-wired connectionRemove the top cover of the RH-8 by undoing the two screws 4. Pass the CAT-5 cable through the hole in t

RH-8 Installation Guide12installation instructions below (see “Mounting the RH-8 on a at surface” on page 14). Otherwise, secure the top cover with t

RH-8 Installation Guide13If the framework to which the RH-8 is being attached is smooth (or brand new!), it may be advisable to protect the frame with

RH-8 Installation Guide14Mounting the RH-8 on a at surfaceUse the two holes 8 to x the RH-8 to a at surface, using wood screws or other xings as a

RH-8 Installation Guide15OperationThe RH-8 has a 3.5 mm 3-pole jack socket at the front of the moulding 1. The RH-8 is suitable for headphones having

Cloud Electronics Limited140 Staniforth RoadShefeld S9 3HFEnglandTel: +44 (0)114 244 7051Fax: +44 (0)114 242 5462email: [email protected]: www.clou

RH-8 Installation Guide2

RH-8 Installation Guide3ContentsSafety Information ...4Introduction ...

RH-8 Installation Guide4Safety InformationThe Cloud RH-8 contains no active electronics and thus requires no AC or DC voltage supply. Safety precautio

RH-8 Installation Guide5What’s in the BoxPlease check the box for damage before opening. If there is damage, please contact your Cloud agent and the s

RH-8 Installation Guide6Top view 134421. Headphone socket (at front)2. Music source selection switch3. Headphone volume control4. Top cover securi

RH-8 Installation Guide7Base view569856875. Cable tie bracket locations for horizontal mounting6. Cable tie bracket locations for vertical mounting7

RH-8 Installation Guide8InstallationIMPORTANT: The CAT-5 connection to the RH-8 can be made in two ways, either by plugging an RJ45 connector into th

RH-8 Installation Guide9RJ45 connectionIf the RH-8 is to be installed on an exercise machine or similar, we recommend that a standard data connection