Cloud-electronics DCM1 Manuel d'utilisateur Page 58
- Page / 79
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
DCM1 & DCM1e Installation and User Guide V1.058
UTILITY
Conguring the DCM1 with the
DCM1 Utility Tool
Almost all DCM1 congurations and settings may be made
remotely using serial commands through the rear panel
RS232 INTERFACE connector*. A simple software
application, the DCM1 Utility Tool, uses this feature to permit
the DCM1 to be congured remotely on a laptop, tablet or
other Windows-compatible device. This allows an installation
engineer to pre-congure a DCM1 off-site, and then upload
the unit’s core conguration and settings from the device
with a single mouse click. Further adjustments to individual
settings may be made in a similar manner.
*A version of the Utility Tool which can use an
Ethernet connection between the device running the Tool and
a DCM1e as well as an RS-232 serial link will be available
during 2014. This will allow devices without either serial
or USB ports to use the Tool, provided they have network
capability. Please check www.cloud.co.uk for details.
Installing the Utility Tool
The DCM1 Utility Tool may be used with either the DCM1 or
DCM1e. At the time of publication, the application has been
tested with Windows XP (+SP3), Windows Vista, Windows
7 and Windows 8; please check www.cloud.co.uk for any
updates to this list. Note that there is no Mac version.
The Utility Tool may be downloaded free of charge from the
Cloud website, www.cloud.co.uk. From the Home page, select
Products, then the DCM1 or DCM1e. Select Technical Notes
from the options list on the right; download the two Utility
Tool les – the application itself is a .zip le, the other is a
.pdf ReadMe le. Save the les to a suitable location.
The ReadMe le gives information about DCM1 OS
compatibility; see page 39 for details of how to check which
rmware version is installed.
Navigate to the .zip le, and unpack it. The zip contains a
single .exe le, DCM1Utility Tool Vn_m.exe (where
n.m is the version number). Save this le to any convenient
location.
Connecting to the DCM1
Serial communication between the Utility Tool and a DCM1
uses one of the device’s Comms ports. If the device does not
have a 9-pin serial port, obtain a USB to RS-232 convertor
and connect to a USB port. Use a standard, male-to-female,
9-pin serial cable to between either the native serial port or
the USB convertor and the DCM1’s RS232 INTERFACE
connector. See page 66 for further information regarding
the interface and cable.
The Utility Tool operates at 9600 baud, which is the default
baud rate of the DCM1’s serial port. If the baud rate has been
altered, it will be necessary to reset it to 9600 baud. See page
38 for details on how to do this.
Launch the Utility Tool by clicking on its .exe le icon.
The Tool defaults to the Comms port in use last time the
application was run; at the rst launch, this will be Com 1. If the
serial (or USB) port being used is different, it can be chosen
by selecting Port in the Menu bar and choosing the correct
one. If you have a problem establishing communication with
the DCM1, please check your device’s port settings.
COMMS PORT
(iffitted)
USBPORT
NETWORK
PORT
LAPTOP,TABLET, OR OTHER
COMPUTER DEVICE
LAPTOP,TABLET, OR OTHER
COMPUTER DEVICE
9-pin SERIAL CABLE
COMMS PORT
(iffitted)
USBPORT
NETWORK
PORT
9-pinSERIALCABLE
USBTO RS-
232
ADAPTOR
USBCABLE
COMMS PORT
(iffitted)
USBPORT
(iffitted)
NETWORK
PORT
NETWORKCABLE
OR
ETHERNET INTERFACE (DCM1e only)
SERIAL INTERFACE
ETHERNET INTERFACE (DCM1e only)
SERIAL INTERFACE
ETHERNET INTERFACE (DCM1e only)
SERIAL INTERFACE
For use with updated version of Utility Tool; available during 2014
- DCM1 & DCM1e 1
- Contents 2
- Safety Information 4
- What’s in the box 5
- Section 1: Overview 6
- System Components 7
- Optional components 7
- Cloud DCM1 Utility Tool 8
- System Capabilities 9
- Applications and Examples 11
- System 2 12
- System 3 13
- Section 2: Installation 14
- Description of rear panel 15
- Hardware considerations 17
- System Connections 17
- Standard connection: 18
- CDR-1 Remote Control Plates 19
- Connections 20
- Network Terminations 21
- Mic and Line Input Modules 22
- Connections and wiring 23
- PM Terminations 24
- PM DC power 24
- Adjusting paging levels 24
- Zone paging outputs 24
- Paging microphone input 25
- Paging Access Connector 26
- Section 3: Conguration 27
- (DCM1e only) 28
- Groups menu 29
- Installer Mode 30
- SELECT INPUT 31
- Routing Menu 32
- Output or GPIO mode 33
- Rotary Control sets offset 34
- System Menu 35
- Rotary Control selects Zone 36
- Press to change mode 36
- Press moves to next character 36
- Numeric buttons select Input 36
- Numeric buttons enter key 38
- Rotary Control sets Baud Rate 38
- Priorities Menu 40
- Rotary Control sets value 41
- Numeric buttons select Zone 43
- Rotary Control sets level 45
- Other DCM1 adjustments 46
- Current Zone 47
- Reception 47
- Normal Mode Installer Mode 48
- Display adjustments 50
- Inactivity Time 50
- Assign Zone 50
- Security 51
- Browser compatibility 52
- Quick Troubleshoot 52
- Grouping 53
- Security Page: 54
- Input Status: 56
- Network: 56
- Device Info: 56
- Change PIN: 57
- Conguring the DCM1 with the 58
- DCM1 Utility Tool 58
- Inputs Tab 59
- Outputs Tab 59
- Installer Key Tab 60
- System Tab 60
- System Interconnections 62
- Music Mute Input 64
- RS-232 Control 64
- Ethernet interface 64
- Port parameters 66
- 1. Input Selection: 67
- 2. Zone Levels: 67
- 3 . Enable/Disable Groups 67
- 4 . Enable/Release Paging 67
- PSU capability 69
- RJ45 pinout 69
- DCM1 only: 70
- DCM1e only: 70
- Record value (if used) 74
- SYSTEM MENU 74
- EMC considerations 75
- Specications 75
Produits connexes et manuels pour Audio Cloud-electronics DCM1
(38 pages)
(5 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels